NTPM 100D / 110D
Smart Energy Sensor
9-48 VDC, Ethernet, RS485, 1 Digital Output, 2 Relay outputs, up to 31st Harmonic, Alarms
Electrical characteristics
Power supply
| Voltage | 9 – 48 V DC |
| Power consumption | Max. 2.5 W |
Voltage inputs
| Measured voltage (Un) | Up to 400 V L-N / 690 V L-L (Wye) or 600 V L-L (Delta)
UL listed up to 347 V L-N / 600 V L-L |
| Measurement by voltage transformer | Support external VT with ratio up to 350 |
| Measurement category | CAT III 600 V per IEC 61010-2-030 |
| Frequency range (configurable) | 47 – 53 Hz (50 Hz nominal) |
| 57 – 63 Hz (60 Hz nominal) | |
| Network type | Single-phase / Two-phase / Two-phase with neutral / Three-phase / Three-phase with neutral |
| Impedance | 5 MΩ |
| Overload | 1.15 Un |
Current inputs
| Maximum CT primary | 5000 A |
| Rated input current (Ib) | 5 A |
| Supported CT | Support external CT with ratio up to 1000 |
| Measured current | up to 5000 mA |
| Starting current | 0.001 Ib |
| Permissible current overload | 6 A continuous |
| 20 A 10 sec | |
| 50 A 1 sec | |
| Frequency range | 47 – 53 (50 Hz nominal) |
| 57 – 63 (60 Hz nominal) |
Measuring characteristics
| Accuracy class | 0.5 |
| Active power measurement precisions class | 0.5 |
| Reactive power measurement class | 0.5 |
| Power factor (PF) precision class | 0.5 |
| Frequency measurement precision class | 0.5 |
| Voltage harmonics | up to 31st harmonic |
| Current harmonics | up to 31st harmonic |
| Sampling rate | 64 samples / cycle |
Relay outputs
| Number of outputs | 2 |
| Type | General purpose |
| Maximum load voltage | 250 V AC / 30 V DC |
| Maximum load current | 1 A |
Digital outputs
| Number of outputs | 1 |
| Type | Form A solid state relay |
| Maximum load voltage | 30 V AC / 60 V DC |
| Maximum load current | 125 mA |
| ON resistance | 8 Ω |
| Isolation | 2500 V RMS for 1 minute |
Communication
| Interfaces | 10/100 Mbps Ethernet | 1 port |
| Modbus TCP, ICMP server, DHCP client, Lan Discovery, Web server | ||
| RS 485 | 1 port | |
| Modbus RTU | ||
| 2.5 kV RMS, double isolated | ||
| Protocols | Modbus TCP | |
| Modbus RTU | ||
Mechanical characteristics
| Dimensions | 88 x 94 x 58 mm (5 modules) | |
| Net weight | 300 g | |
| Case | Material | Plastic, PC (UL 94 V-0) |
| Mounting | 35 mm DIN rail | |
| IP degree of protection | <IP40 | |
Environment
| Operating temperature | -25 to 70 °C |
| Storage temperature | -40 to 80 °C |
| Relative humidity | 5 to 95 % non-condensing |
| Altitude | <2000 m |
| Pollution degree | 2 |
EMC (Electromagnetic compatibility)
| Harmonic emissions | IEC 61000-3-2 | class A |
| Flicker limitations | IEC 61000-3-3 | Compliant |
| Immunity to ESD | IEC 61000-4-2 | Level 4 |
| Immunity to radiated fields | IEC 61000-4-3 | Level 3 |
| Immunity to fast transients | IEC 61000-4-4 | Level 4 |
| Immunity to surges | IEC 61000-4-5 | Level 4 |
| Conducted RF disturbances | IEC 61000-4-6 | Level 3 |
| Immunity to magnetic fields | IEC 61000-4-8 | Level 3 |
| Immunity to voltage dips and interruptions | IEC 61000-4-11 | Compliant |
| Radiated RF emissions | EN 55011 + EN 55016-2-3 | Class A |
| Conducted RF emissions | EN 55011 + EN 55016-2-1 | Class A |
Safety
 |
Compliant to Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU |
| Standards | EN 61010-1:2010 |
| EN 61010-2-030:2010 | |
| EN 61326-1:2013 | |
| EN 61000-6-2:2005 + AC:2005 | |
| EN 61000-6-4:2007 + A1:2011 | |
| Protection class | Class II according to EN 61010-1:2010
Double insulated for user accessible parts |
Sustainability
| EU RoHS Directive | Compliant |
| Toxic heavy metal free | Yes |
| Mercury free | Yes |
| WEEE | At its end of service life, the product must be disposed of and recycled following specific waste collection regulations on EU markets. |
Datasheet
Manuals
Certificates
Explore more
NTPM 100A / 110A
100-270 VAC, Ethernet, RS485, 3 Digital Ouputs, up to 31st Harmonic, Alarms
Explore
NTPM 100D-DI / 110D-DI
9-48 VDC, Ethernet, 3 Digital Inptus, 1 Digital Output, 2 Relay outputs, up to 31st Harmonic, Alarms
Explore
NTPM 100A-DI / 110A-DI
100-270 VAC, Ethernet, 3 Digital Inputs, 1Digital Output, 2 Relay outputs, up to 31st Harmonic, Alarms
ExploreRelated Case Studies
EDB LV MONITORING
Netico Low Voltage Monitoring system in use at the Electricity Distribution Company of the city of Belgrade in Serbia.
Find Out More
